TJ-KB2000IBC Large Blow Molding Machine
Tongjia tj-kb2000ibc large hollow blow molding machine is mainly used to produce industrial IBC packaging barrels, blow molding pallets, civil water storage tanks, amusement facilities, etc. the original imported wall thickness control system ensures the uniformity of container thickness and meets the needs of users for hollow products of different specifications.
Add to quoteTongjia TJ-KB2000IBC large blow molding machine is mainly used to produce industrial IBC tanks, blow molding pallet, water tanks, amusement facilities, etc. The original imported parison control system ensures the uniformity of container thickness. This machine can meet the needs of users for different products.
| Mold opening and closing system: diagonal double pull rod central mold locking two-way synchronous high-precision linear guide rail guided mold opening and closing mechanism |
| Die head: single cylinder central feeding and storage cylinder die head |
| Extrusion system: variable frequency speed regulation + hard tooth surface reducer |
| Hydraulic system: fully imported hydraulic valve + hydraulic servo control system |
| Control system: imported PLC + complete machine control system imported from Europe (Jefferson, Italy) |
| 1 Specifications | Units | TJ-KB2000IBC | TJ-KB2000IBC（II） |
| 1.1 Material | HDPE | HDPE | |
| 1.2 Droducts | IBC | IBC | |
| 1.3 Die quantity | Set | 1 | 1 |
| 1.4 Machine dimension | M | 11.0×6.6×6.5 | 11.0×6.6×6.5 |
| 1.5 Machine weight | Ton | 55 | 59 |
| 2 Die-head | |||
| 2.1 Accumulator capacity | L | 40 | 40 |
| 2.2 Max. diameter of die | mm | 600 | 600 |
| 2.3 Die head heating power | KW | 约58 | 约64 |
| 2.4 Die head heating zone quantity | zone | 5 | 5 |
| 3 Clamping Unit | |||
| 3.1 Clamping force | KN | 1800 | 1800 |
| 3.2 Distance between platens | mm | 1000-3000 | 1000-3000 |
| 3.3Mold platen size（W×H） | mm | 1650×1600 | 1650×1600 |
| 4 Extruder unit | |||
| 4.1 Screw diameter | mm | 150 | 120×2 |
| 4.2 Screw L/D ratio | L/D | 30 | 30 |
| 4.3 HMWHDPE Plasticizing amount | Kg/h | 500 | 380×2 |
| 4.4 Screw heating zone quantity | zone | 6 | 6×2 |
| 4.5 Screw heating power | KW | 64 | 36×2 |
| 4.6 Extruder driving power | KW | 200 | 132×2 |
| 5 Power | |||
| 5.1 Total power consumption | KW | 375 | 453 |
| 5.2 Hydraulic drive power | KW | 45+7.5 | 45+7.5 |
| 5.3 Cooling water consumption | m³/h | 40 | 40 |
| 5.4 Cooling water pressure | Mpa | 0.3-0.6 | 0.3-0.6 |
| 5.5 Air pressure | Mpa | 1 | 1 |
| 5.6 Air consumption | m³/min | 3 | 3 |
